Metallizing Equipment Co. Pvt. Ltd.

Auxiliary Equipments

  • MEC ACOUSTIC CHAMBER


    The greatest care should be used in handling to minimize the danger of the dust explosion resulting from HVOF spraying, adequate ventilation must be provided for spray booths and other confined spaces, to prevent the accumulation of fumes and dust. All types of dust having considerable calorific value can be explosive. This dust includes flour, starch, hard rubber dust, wool flour, aluminum dust and the dust of other metals. Aluminum and magnesium dusts are particularly hazardous. The dust must be wetted down and remain immersed in water. Accumulation of dry or partially wet dust should not be permitted. A MEC-SPRAY BOOTH is recommended to fulfill the requirements of the dust collection of system.
  • MEC AIR CONTROL UNIT


    The air control unit has two filters for removing oil and moisture from the compressed air and a pressure regulator for regulating the air pressure.
  • MEC GAS CONTROL UNIT


    The unit consists of precision two-stage regulators for accurate adjustment of oxygen and fuel gas pressures where continuous, high speed flow is possible.

    MANIFOLD is recommended for connecting several gas cylinders together. Additional regulator is supplied for the regulation of nitrogen which is used as a carrier gas to powder feeder.
  • MEC HOSE KIT


    This is a group of three matched high pressure high quality, light weight flexible hoses equipped with proper fittings.

    The hoses have proper fittings at both sides to connect the control panel & gun distinctly. Initially hoses will be connected to control console and the hoses blown out at low pressure before the gun is connected.
  • MEC PORTABLE TROLLY


    This is a group of three matched high pressure high quality, light weight flexible hoses equipped with proper fittings.

    The hoses have proper fittings at both sides to connect the control panel & gun distinctly. Initially hoses will be connected to control console and the hoses blown out at low pressure before the gun is connected.
  • GUN MOUNTING STAND


    This is a group of three matched high pressure high quality, light weight flexible hoses equipped with proper fittings.

    The hoses have proper fittings at both sides to connect the control panel & gun distinctly. Initially hoses will be connected to control console and the hoses blown out at low pressure before the gun is connected.
  • MEC LPG VAPORIZER


    LPG VAPORIZER is attached to the system to convert the liquefied fuel into vaporized state to get the precise combustion process.

    In this system the temperature can be adjusted according to the process requirements and it leads to the accurate melting of particles.
  • MEC WATER JAM BOX


    It has been designed to control the water flow and temperature of the cooling system,

    If the temperature is exceeded to a level the system will shutdown the coating process, user can find out the temperature of the cooling water by using this system.
  • MEC EXTENTION NOZZLE


    This is an attachment to the spray gun to provide internal coatings of the bores and mould cavities. Coating can be possible in internal diameters of 200mm. Designed to withstand high temperatures.

    Produces comparative coating characteristics without compromising the actual spray coating characteristics.

    Extention Nozzle are avaible for HVOF, LVOF, Powder, arcspray.
  • MEC WATER COOLED JACKET


    Water cooled jacket is used as an attachment to the spray gun for additional cooling of the gun when the working temperatures are too high.
  • MEC GAS MANIFOLD


    For uniform flow throughout the process and uninterrupted gas supply is required. Single cylinder may not fulfill the need of the coating process.

    To overcome this problem a GAS MANIFOLD is introduced to take gas from number of cylinders and sent to the gun consistently.
  • MEC AJ AIR BLAST COOLING UNIT


    While coating the surface of the substrate, gets heated rapidly and this leads to interrupt the process.

    In order to overcome this problem MEC introduced an Air Blast Cooling Unit to propel air on to the surface of the substrate while the spraying is in-process. This prevents overheating of the substrate.
  • MEC Personal Protective Equipment


    MEC takes safety of thermal spray very seriously instead an option. All our HVOF systems are engineered and built for productive and safe operation.

    MEC will strongly recommend the operator to follow the safety symbols which are affixed on each subsystem while operating the thermal sprays system.
Caution :- Many people have copied our trademark, name, logo and email-id. Hence be cautious.
©2007-2015, Metallizing Equipment Co. Pvt. Ltd. All Rights Reserved.